GETTING A PROFESSIONAL AUDIT

You can get a comprehensive energy audit, including a blower door test, to identify sources of air infiltration, and to test how tight your home is after sealing.

Consider an energy audit
Find out from a pro where heat is being lost through your home's shell and what you should do about it. Energy auditors use sophisticated equipment, like a blower door and infrared camera, to help pinpoint air leaks and areas with inadequate insulation. Trained energy auditors know what to look for in both newer and older houses, and the investment in their time is usually well worth the cost. Depending on the service, you may be able to have your heating or cooling system cleaned, tuned up, and tested at the same time. For more information on the services available from home performance contractors, visit http://www.homeenergy.org/perfbro.intro.html. Or contact your state energy office or cooperative extension service for information on qualified auditors and contractors in your area.http://www.aceee.org/consumerguide/buttonup.htm

RECOMMENDATIONS FOR FINDING A CONTRACTOR from ENERGY STAR

For many, finding the right contractor is the biggest hurdle to improving their home. Below is a list of different types of contractors you may need to hire. Under each type is a brief description of the service they provide and questions or suggestions for working with them. In addition, the Federal Trade Commission offers general tips for hiring a contractor that you should always follow.

Energy Specialists
Heating and Cooling Contractors
Air Sealing Contractors
Insulation Contractors

ENERGY SPECIALISTS

Home Energy Raters
A Home Energy Rater is a specialized contractor who performs a standardized evaluation of the energy efficiency of your home. The evaluation includes:

• on-site inspection
• air leakage test of your home and duct work
• computer analysis
• estimated savings
• home energy rating
• Home Energy Raters typically perform the role of an independent consultant, but some will offer to make improvements.

Energy Auditor
An Energy Auditor performs an evaluation of the energy efficiency of your home that may or may not be as comprehensive as a home energy rating.

Finding an Energy Specialist

To find a home energy rater visit the Residential Energy Services Network
Energy audits are often provided by utilities for free or at a discounted rate. Contact your electric or gas utility and ask if they offer an energy audit.

Tips for working with an Energy Specialist

Ask how long the evaluation will take (a comprehensive evaluation can take about 3 hours depending on the size of the home)
Ask if they will provide a list of improvements
Ask if they will make any of the improvements
Ask if they can recommend someone who can make the improvements

Home Performance with ENERGY STAR
Find out if Home Performance with ENERGY STAR is available in your area. A qualified contractor inspects your home and recommends customized and cost-effective energy and comfort improvements.

HEATING AND COOLING CONTRACTORS

A Heating and Cooling Contractor is a specialized contractor who installs and services heating, cooling and ventilation equipment. They sell, service and install ducts, programmable thermostats, furnaces, boilers, central air conditioners, and heat pumps. Some contractors provide specialized services like air balancing, duct sealing and energy or comfort audits.

Tips for working with a Heating and Cooling Contractor

• Ask if the installation or service technician, who will work on your system, is certified by NATE (North American Technician Excellence). NATE is the leading industry-supported testing and certification program for technicians.
• Ask if there are special offers or rebates available for purchasing ENERGY STAR qualified equipment.
• Ask the contractor to size your new equipment to meet the needs of your house. A bigger system isn't always better. New equipment should be sized based on the size of your house, level of insulation, type of windows and other factors. The Manual J, from the Air Conditioning Contractors of America (ACCA), is a common method used by contractors to properly size heating and cooling equipment.
• Ask the contractor to inspect your ducts for air leaks and insulation if you have a forced-air system (i.e. furnace, heat pump or central air conditioner). It is especially important to check ducts located in an attic or crawlspace.
• Ask the contractor for an itemized estimate of the work and equipment they propose.

AIR SEALING CONTRACTORS

An Air Sealing Contractor is a specialized contractor that seals air leaks in the building's envelope (a key part of Home Sealing). They commonly use spray foam and other materials to seal bypasses, gaps, and cracks in attics, basement, walls and floors.

Finding an Air Sealing Contractor Air Sealing Contractors are not commonly listed in the yellow pages under "air sealing". To find an air sealing contractor contact a Home Energy Rater in your area and ask if they perform air sealing services or can refer you to someone who does. To find a home energy rater visit the Residential Energy Services Network

Air Sealing is a common improvement offered through the U.S. Department of Energy's Weatherization Assistance Program. State weatherization contacts may be able to refer you to an air sealing contractor in your area.

Tips for working with Air Sealing Contractors

• Ask if they measure air leakage before and after sealing using a blower door.
• Ask if they will test the safety of combustion appliances after sealing.
• Air Sealing should be completed before adding insulation. Some Air Sealing contractors also install insulation or can recommend an insulation contractor they typically work with.
• Ask if they install insulation or can refer an insulation contractor.

INSULATION CONTRACTORS

An Insulation Contractor is a specialized contractor who installs thermal insulation. Insulation contractors usually specialize in one type of insulation (e.g. fiberglass, cellulose, spray foam), but some will offer to install more than one type.

Finding an Insulation Contractor
Insulation contractors can be found by looking in the yellow pages.

T ips for working with Insulation Contractors
Ask the contractor what "R-value" of insulation they will install. "R" means resistance to heat flow. The higher the R-value, the greater the insulation power. When insulation is installed, your contractor should provide you with a written statement of the R-value as required in the Federal Trade Commission (FTC) insulation regulations. For more information see Home Insulation Basics from the FTC.

To find out the right R-value for your home, see the Department of Energy's insulation fact sheet.

These Recommendations for Finding a Contractor is from http://www.energystar.gov/index.cfm?c=home_improvement.hm_improvement_contractors#1

For More Information:

Contact the Residential Energy Services Network's (RESNET) organization for a list of energy rating professionals. See http://www.natresnet.org.

Facts For Consumers: Home Sweet Home Improvement. How to choose and work with a contractor. http://www.ftc.gov/bcp/conline/pubs/services/homeimpv.htm.

Consumer Quiz: Test Your Skills at Hiring a Home Improvement Contractor http://www.ftc.gov/bcp/conline/edcams/homeimp/quiz1.htm

Consumer Quiz: Test Your Skills at Avoiding a Home Repair Nightmare

http://www.ftc.gov/bcp/conline/edcams/homeimp/quiz2.htm

You can file a complaint online, by telephone 202-FTC-HELP, or by mail, Consumer Response Center, Federal Trade Commission, Washington, D.C. 20580.